Features

 

Wire Management

Wire management

We know you do not like messy wiring. Neither do we. That was the reason why we spent tons of time and effort to manage those wires. We even went back to change the machine design multiple times in order to get a better routing option. Finally, we worked out a solution which can meet our standard to be part of a "neat machine". Hope you will like it as we do.







HBP Corner

No binder clips, please.

Binder clips have become the typical solution in many desktop 3D printers to hold the print surface to the build platform. Although they work fine for the purpose of holding the print surface, they waste otherwise usable print area on the edges,  interfere with the extruder nozzle, and give an "unfinished" look to your printer. The Artifex 3D Printer comes with newly designed HBP (Heated Build Platform) corners, which have securing slots to hold the glass plate and the heat spreader in place. The HBP corners can be easily slided out to release the glass top if you need to access the glass for maintenance.



Adjustable Y-axis Carriage

Less vibration means faster and quieter printing

In the original MendelMax 2.0 design, large vibration was observed at high printing speed. Such vibration created lots of noise and also caused quality problems in the finished parts. Majority of such vibration was caused by the large gap between the Y-axis rail and its carriages. The 3DMakerWorld Artifex 3D Printer uses upgraded Y-axis carriages with adjustable clearance capability. By reducing the gap between the Y-axis rail and the carriages, the 3DMakerWorld Artifex 3D Printer can achieve quiet and high-quality printing even at high speed.






Three-Point Bed Leveling System

Three-point bed leveling system

If you have ever tried both three-point and four-point bed leveling systems, you certainly know how much easier the bed leveling could be with a three-point leveling system. Yes, the 3DMakerWorld Artifex 3D Printer comes with a three-point bed leveling system in place to ease the leveling process.









Adjustable Z-Axis End-Stop Trigger

Adjustable Z-axis zeroing

As you continue advancing into the world of 3D printing, you will find the need to fine tune the distance between the extruder nozzle and the print surface. Such process is called Z-axis zeroing. The Artifex 3D Printer provides the adjustable Z-axis zeroing capability. It uses an adjustable Z-axis end-stop trigger to precisely adjust the nozzle height without messing up the bed level.








HBP Cable Strain Relief

HBP cable strain relief

The HBP heater moves along the Y-axis with the build platform. The joint between the cable of HBP heater and the build platform is often a weak point due to the strain applied during continuous movement. A strain relief is built into the Artifex 3D Printer to secure and support the cable of HBP heater.









Enclosed ElectronicsEnclosed electronics with dedicated cooling fan

The electronics board on the Artifex 3D Printer is completely enclosed from top to bottom for safe operation and easy maintainence. The electronics case also contains a dedicated cooling fan to cool off the electronic components during printing.









24V Power Supply with Rear Panel

24V power supply with convenient power switch

The 3DMakerWorld Artifex 3D Printer uses a 24V power supply to provide better heating capability on heated bed, and to improve motor performance at high printing speed. For the purpose of safety and aesthetics, all wire connectors are enclosed by top/bottom covers and back panel. An easy-reach power switch is installed on the power panel to switch on and off the power to the printer conveniently.






Check out technical specifications: Specifications of Artifex 3D Printer

Took a look at prints made on Artifex 3D Printer: Gallery of Artifex 3D Printer and Prints

Buy Artifex 3D Printers here: Fully Assembled & DIY Kits