Specifications

Specifications

Printing

Print technology

- Fused Filament Fabrication

Build Space

- W × D × H: 230 × 310 × 190 mm (9 × 12.2 × 7.5 in)
- Volume: 13,547 cm3 (827 in3, 2X the volume of MakerBot® ReplicatorTM 2)
(Note: MakerBot and Replicator are registered marks or trademarks of MakerBot Industries, LLC.)
- Height extendable to 220 mm (8.7 in) in the middle of X-axis for additional 198 × 310 × 30 mm (1,841 cm3, or 112 in3) space

Layer resolution

- 0.05 mm (0.002 in)

Nozzle diameter

- 0.35 mm (0.014 in)

Print materials

- 1.75 mm PLA and ABS

Speed

- Top print speed: 150 mm/sec (infill or inner perimeter), 100 mm/sec (outer perimeter)
- Top non-print speed: 300 mm/sec

Acceleration

- Top print acceleration: 3000 mm/sec2 (infill), 1500 mm/sec2 (perimeter)
- Top non-print acceleration: 3000 mm/sec2

Electronical

Power requirements

- 110/220 VAC

Electronics

- RAMBo

Hot-end

- MakerGear hot-end with 0.35mm nozzle

Heated bed

- 24V 200W heated bed up to 120°C

Cooling fans

- Three 24V cooling fans for filament drive, print surface, and electronics

Mechanical

 Overall dimension

- W × D × H: 484 × 482 × 480 mm (19 × 19 × 19 in)

 Weight

- 11 Kg (24 lb)

 Frame

- Aluminum extrusions

Motion

- X- and Y-axis: linear rails and GT2 belts

- Z-axis: precision linear shafting and ACME leadscrews

Printed parts

- Black ABS


Check out neat features in the design: Features of Artifex 3D Printer

Took a look at prints made on Artifex 3D Printer: Gallery of Artifex 3D Printer and Prints

Buy Artifex 3D Printers here: Fully Assembled & DIY Kits