FREE SHIPPING to the Continental United States. For other locations, please add the product into your shopping cart and check the shipping rate in "My Cart" by entering your Country, State/Province, and Zip/Postal Code.
Current lead time: 5 business days.
- WIDE RANGE OF MATERIALS - Equipped with dual high performance E3D V6 all metal hotends to extrude up to 300C for Nylon, Polycarbonate, Flexible Filaments, PLA, ABS, HIPS, and more.
- VERSATILE FOR FLEXIBLE & RIGID - Re-engineered extruder design to handle both flexible and rigid filaments using the same extruder without cumbersome tool change, and eliminate cost for separate extruder.
- HIGH PERFORMANCE - High Resolution (50 micron), Large Build Volume (605 cubic inch), and Fast Print (150mm/s).
- UNTETHERED PRINTING & ON-BOARD CONTROL - Large LCD controller with full size SD card reader for untethered printing and on-board control.
- STURDY STRUCTURE WITH PROFESSIONAL GRADE BUILD - Professional grade linear rails and carriages, chrome-plated precision shafts, stainless steel coupling and ACME lead screws to ensure precision movement.
- Print area: 156W × 310D × 211H mm (6.1 × 12.2 × 8.8in) (Span 124mm along X-axis on top 30mm)
- Layer thickness: 0.05 - 0.3mm (0.002 - 0.012in)
- Positioning precision: X/Y - 12.5micron (0.0005 in), Z - 0.66micron (0.000026in)
- Top print speed: 150mm/sec
- Print materials: 1.75mm PLA, ABS, NinjaFlex, HIPS, PVA, Nylon, Polycarbonate
- Power supply: 24V 400W, compatible with 110/220VAC
- Electronics: RAMBo all-in-one board
- Hot-end: E3D V6 0.4mm up to 300°C
- Heated bed: 24V 200W heated bed up to 120°C
- LCD controller: Large 128 x 64 LCD with full size SD card reader
- Motor torque: X/Y/Z - 5.5kg-cm (76.4 oz-in), Extruder - 9kg-cm (125oz-in)
- Cooling fan: 24V ball bearing for print, filament drive and electronics
- Print software: GUI - Repetier-Host, Slicer - Cura Engine, Slic3r
- Connectivity: USB, LCD (SD Card)
- Operating systems: Windows, Linux, Mac
- Overall dimension (with 8in spool): 520W × 530D × 480H mm (20.5 × 20.9 × 18.9in)
- Weight (without spool): 12.4Kg (27.3lb)
- Color: black
Contents of Package: (For the complete list, please refer to the Packing List in the Build Instructions. All pars are well prepared, and no soldering or crimping are required for the build. Two sets of extruders and hotends are included.)
- Hardware parts
- Electronics parts
- Printed parts: All printed parts are made of black ABS filaments.
- Tool set: putty knife, hex screw driver (4mm, 3mm, 2.5mm, 2mm), hex key (1.5mm, 0.9mm), wrench (8mm, 5.5mm), tweezer, 0.1mm feeler gauge, squeegee
- Kapton films: 10 pcs of 0.08mm (3mil) Kapton sheets 250 × 320mm with release liner
- 30 days (check here for more details)
Check more information about the Artifex 2 3D printer at: http://3dmakerworld.com/artifex2.
WARNING: THE 3DMAKERWORLD ARTIFEX 2 3D PRINTER GENERATES HIGH TEMPERATURE AND CONTAINS FAST MOVING MECHANICAL PARTS WHICH MAY CAUSE INJURY OR DAMAGE. PLEASE FOLLOW THE GUIDELINES CAREFULLY TO OPERATE THE PRINTER SAFELY. 3D MAKER WORLD ASSUMES NO LIABILITY FOR ANY LOSS OR INJURY CAUSED BY OPERATING THE ARTIFEX 3D PRINTER.