Olsson Ruby Nozzle

Availability: In stock


Quick Overview

More Views

  • Olsson Ruby Nozzle
  • Olsson Ruby Nozzle
  • Olsson Ruby Nozzle
  • Olsson Ruby Nozzle
  • Olsson Ruby Nozzle
  • Olsson Ruby Nozzle
  • Olsson Ruby Nozzle

* Required Fields


With this product, you earn 85 loyalty point(s). 85 points = $4.25.


A substantial upgrade for your 3D Printer hotend.


  • ONE NOZZLE: The Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE/PET, Nylon, and composites with abrasive additives such as Carbon fibre, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment, are some of the materials sucessfully tested so far.
  • HIGHLY WEAR RESISTANT: The ruby mounted at the tip makes sure that even the toughest materials will be printable. It was originally designed for printing with Boron Carbide (B4C), the third hardest known material in the world.
  • EXCELLENT HEAT CONDUCTIVITY: Since most of the Olsson Ruby is made from brass, with its excellent heat conductivity, performance and throughput is first-class.
  • VERIFIED PERFORMANCE: People all over the world have been testing different iterations of the ruby nozzle since early 2016. We are very happy to have received only good printing results from this community.
  • MANUFACTURING QUALITY: The Olsson Ruby is manufactured, assembled and tested in a high-quality facility in Sweden. This is why 3DVerkstan guarantees the very best quality and tolerances.
  • SPEED: By using the 0.6, 0.8mm and High Output versions it is possible to reach a higher throughput and speed than ever before for abrasive materials, while retaining wear-resistance and reliability.

COMPATIBILITY LIST:The classic version, compatible with a wide range of printers with excellent performance, wear-resistance and reliability.

    Every printer with a E3D V4/V5/V6 1.75mm hotend or similar geometry, including:
    Prusa Research i3 MK2
    E3D BigBox
    gCreate gMax 1.5XT+
    Makerbot Replicator 2/2X *4
    Felix Pro 2 * 4
    Raise3D N1/N2 *5
    Ultimaker 2+
    Ultimaker 2+ Extended
    Ultimaker 2 with Olsson block upgrade
    Ultimaker 2 Extended with Olsson block upgrade
    Ultimaker Original *1 *2
    Ultimaker Original+ *1 *2
    Lulzbot TAZ 3 with hexagon hotend upgrade *2
    Lulzbot TAZ 4 with hexagon hotend upgrade *2
    Lulzbot TAZ 5
    Lulzbot TAZ 6 *2 *3
    3ntr A2 v2
    3ntr A4 v3
    Every printer with a E3D V4 3.0mm hotend *2
    Every printer with a E3D V5 3.0mm hotend *2
    Every printer with a E3D V6 3.0mm hotend *2

*1 = You will need to adjust the fan shroud since the nozzle is shorter than the original nozzle.
*2 = You will need to mount it with the nozzle not placed against the front face of the heater block but against the heat break/isolator tube to create a seal.
*3 = Will require disabling of the automatic bed leveling since the ruby tip is not conductive.
*4 = Several testers reports success
*5 = Adjustment of z-stop required, also see notes on the revision of your Raise3D printer in the Instructions for use