Our store is under maintenance till 2/18. All website information and checkout are still open, but order fulfillment will resume after 2/18. Sorry about any inconvenience caused by this.

taulman3D-DuPont T-Lyne High-Durability Flexible Filament

Availability: In stock


Quick Overview

More Views

  • taulman3D-DuPont T-Lyne High-Durability Flexible Filament

* Required Fields


With this product, you earn 35 loyalty point(s). 35 points = $1.75.


T-lyne is a unique, crystal clear polyethylene co-polymer isomer developed specifically for high durability, flexibility, unique viscosity and a wide temperature range.

Glass-like aesthetics can easily be obtained at high layer sizes using low speed and low temperatures in the range of 190 C to 210 C.  Utility style parts are easily printed faster at standard layer sizes using higher temperatures up to 245 C, depending on nozzle size.

Specifications when 3D Printed:

  • Tensile strength: 6,850 psi
  • Ultimate elongation: 5.9%
  • Heat distortion temp: 70C

Typical Print Settings:

  • Print temp: 185C to 220C. Smaller nozzles than .5mm can use a higher temp up to 235C. (NOTE: When T-Lyne is too hot, it will have lots of fine bubbles and a rough texture)
  • Nozzle: larger = better or easier to print
  • Print speed: 25mm/s (Direct Drive), or 18mm/s (Bowden) - varies from unit to unit
  • Print bed: T-Lyne prints on most beds cold and heated beds to 40C