Our store is under maintenance till 2/18. All website information and checkout are still open, but order fulfillment will resume after 2/18. Sorry about any inconvenience caused by this.

taulman3D T-Glase PET Co-Polymer Filament

Availability: In stock

$27.00

Quick Overview

More Views

  • taulman3D T-Glase PET Co-Polymer Filament
  • taulman3D T-Glase PET Co-Polymer Filament
  • taulman3D T-Glase PET Co-Polymer Filament
  • taulman3D T-Glase PET Co-Polymer Filament
  • taulman3D T-Glase PET Co-Polymer Filament
  • taulman3D T-Glase PET Co-Polymer Filament
  • taulman3D T-Glase PET Co-Polymer Filament
  • taulman3D T-Glase PET Co-Polymer Filament
  • taulman3D T-Glase PET Co-Polymer Filament
  • taulman3D T-Glase PET Co-Polymer Filament
  • taulman3D T-Glase PET Co-Polymer Filament
  • taulman3D T-Glase PET Co-Polymer Filament
  • taulman3D T-Glase PET Co-Polymer Filament
  • taulman3D T-Glase PET Co-Polymer Filament
  • taulman3D T-Glase PET Co-Polymer Filament

* Required Fields

$27.00

With this product, you earn 27 loyalty point(s). 27 points = $1.35.

Details

t-glase (tee glass, short for tough glass) was developed specifically by taulman3D to provide three major features to 3D printing: low shrinkage, higher strength than ABS, and aesthetics beyond ABS and PLA due to it's enhanced optical properties. t-glase is very strong, yet different from our nylons as it’s stiff, like PLA and ABS. Its low shrinkage feature makes printing large flat surfaces a breeze. And it easily prints to acrylic, glass, Kapton and other platforms.

Specifications when 3D Printed:

  • Tensile strength: 4,516 psi
  • Ultimate elongation: 7.8%
  • Tg glass transition temp: 76C

Typical Print Settings:

  • Print temp: 238C - 245C
  • Nozzle: any size
  • Print speed: ABS speeds, or slower for high detailed prints
  • Retraction: .5mm/.1mm nozzle (e.g., for a .5mm nozzle = 2.5mm)
  • Print bed: glass heated to 45C with coat of PVA