Our store is under maintenance till 2/18. All website information and checkout are still open, but order fulfillment will resume after 2/18. Sorry about any inconvenience caused by this.

PC-ABS Alloy 1.75mm 500g Spool

Availability: In stock


With this product, you earn 35 loyalty point(s). 35 points = $1.75.

Quick Overview

Incredibly tough material for advanced users. Heated bed is required.


Proto-pasta Polycarbonate ABS (PC-ABS) Alloy is an incredibly tough material designed for strong, resilient parts. This unique material provides vast improvements (over standard ABS) in heat deflection, impact resistance, rigidity, and flexibility.

Processing is more challenging, and recommended for advanced users.

- Diameter: 1.75mm
- Color: black
- Weight: 500g (1.1lbs)

- Spool diameter: 8'' (203mm)
- Spool height: 3'' (76mm)
- Hub hole diameter: 2'' (51mm)

- Sealed in a plastic bag with desiccants

- Extrusion temperature: 260°C – 280°C
- Bed temperature (if available, not required): 110+°C
- Print surface: covered by Polyimide (e.g., Kapton) tape with a glue stick applied to the surface

- PC-ABS is very moisture sensitive and should be kept bagged with desiccant when not printing. Drying in an oven at 85-95°C for an hour before printing may be required for bubble free high strength prints.

- Material Safety Data Sheet